 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Document 286-1 SMT Power Inductors - LPO6013 Series * Very low profile - only 1.3 mm high! * Handles saturating current up to 1.9 Amps Designer's Kit C352 contains 3 each of all values Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight 111 - 122 mg Ambient temperature -40C to +85C with Irms current, +85C to +125C with derated current Storage temperature Component: -40C to +125C. Packaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 1000/7reel; 3500/13 reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.4 mm pocket depth Recommended pick and place nozzle OD: 5.6 mm; ID: 2.8 mm PCB washing Only pure water or alcohol recommended 1 2 Part number 1 L2 (H) 1.0 1.5 2.2 3.3 3.9 20% 20% 20% 20% 20% 2 DCR SRF max typ 2Isat3 3Irms4 (Ohms) (MHz) (A) (A) 0.06 0.07 0.08 0.11 0.13 0.15 0.20 0.22 0.30 0.38 0.52 0.73 0.96 1.0 1.7 3.2 4.3 5.8 7 10 14 21 200 200 150 110 100 90 70 65 60 47 37 30 28 25 21 17 14 10 8 7 1.9 1.6 1.3 1.1 1.0 0.90 0.70 0.70 0.60 0.55 0.45 0.40 0.35 0.30 0.28 0.22 0.19 0.15 0.13 0.10 1.5 1.4 1.3 1.3 1.2 1.2 1.2 1.0 1.0 0.85 0.80 0.74 0.67 0.60 0.49 0.35 0.30 0.26 0.23 0.20 0.18 0.13 1. When ordering, please specify termination and packaging code: LPO6013-473KLC Termination: L = RoHS compliant silver-palladium-platinum-glass frit. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13 machine-ready reel. EIA-481 embossed plastic tape (3500 parts per full reel). 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc. 3. DC current at which the inductance drops 10% (typ) from its value without current. 4. Current that causes a 40C temperature rise from 25C ambient. 5. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. LPO6013-102ML_ LPO6013-152ML_ LPO6013-222ML_ LPO6013-332ML_ LPO6013-392ML_ LPO6013-472ML_ LPO6013-682ML_ LPO6013-822ML_ LPO6013-103KL_ LPO6013-153KL_ LPO6013-223KL_ LPO6013-333KL_ LPO6013-393KL_ LPO6013-473KL_ LPO6013-683KL_ LPO6013-104KL_ LPO6013-154KL_ LPO6013-224KL_ LPO6013-334KL_ LPO6013-474KL_ 4.7 20% 6.8 20% 8.2 20% 10. 10% 15. 10% 22. 10% 33. 10% 39. 10% 47. 10% 68. 10% 100. 10% 150. 10% 220. 10% 330. 10% 470. 10% LPO6013-684KL_ 680. 10% LPO6013-105KL_ 1000. 10% 5.6 0.09 4.7 0.07 Specifications subject to change without notice. Please check our website for latest information. Document 286-1 Revised 10/15/08 (c) Coilcraft, Inc. 2009 Document 286-2 SMT Power Inductors - LPO6013 Series Typical L vs Frequency 10000 1000 H Typical L vs Current 10000 1000 H 1000 1000 Inductance (H) 100 100 H Inductance (H) 100 100 H 10 10 H 10 10 H 1 1 H 1 1 H 0.1 0.01 0.1 1 10 0.1 0.01 0.1 1 10 Frequency (MHz) Current (A) Irms Derating 120 110 100 0.051 max 1,3 0.220 max 5,6 0.040 0.005 1,016 0,127 0.236 max 6,0 Dash number Percent of rated Irms 90 80 70 60 50 40 30 20 10 0 -40 -20 0 20 40 60 80 100 120 140 XXX X 0.134 3,4 25C Internal code 0.200 5,08 Recommended Land Pattern 0.050 1,27 Ambient temperature (C) 0.230 5,84 Dimensions are in inches mm Specifications subject to change without notice. Please check our website for latest information. Document 286-2 Revised 10/15/08 (c) Coilcraft, Inc. 2009 |
Price & Availability of LPO6013-822ML
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |